The Power House, Inc. on FACEBOOK
Home
Our Products
Products in Action
FAQ's
Image Gallery
About Us
Contact Us






Click Here to register



Back to Main Products Page
Olympus Display Fountain Series | Aerating Fountains | Aerators | Flo-Ration | Ice Eater | Fountain/Aerator Parts & Accessories

The Ice Eater is designed to prevent ice from forming around boats, marinas, docks, and piers as well as effectively melting existing ice by breaking the surface with a continuous current of warmer bottom water.

Ice Eater's propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation.

Ice Eater will melt existing ice. Unlike other de-icing units, Ice Eater requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in.

The Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

The design of the Ice Eater's venturi shroud (housing) with outwardly flared ends draws warmer water from greater depths than other conventional de-icers.

The shroud is submersible below the surface either vertically or angled from vertical. A set of mounting holes at opposed positions on the flange allows the lines to be attached.

The Power House is committed to providing the finest Ice Eaters available in the marketplace. As a result, specifications are subject to change without notice.

Ice Eater de-icers are custom designed and engineered for maximum performance.

Our units are designed to agitate fresh or salt water at maximum efficiency in all climatic conditions.

Our energy efficient Ice Eater's will agitate more water than any de-icer on the market today.

We ship by U.P.S. or motor freight.

US Patent # 4,247,261



MODEL F250


SPECIFICATIONS:

1/4-hp
2.5 Amps* 115V
Open Diameter
: 20' - 25'
Cord Lengths (ft): 25, 50, 100, 150, 200
Shipping Weights: 29, 31, 35, 43, 49



MODEL P500


SPECIFICATIONS:

• 1/2-hp
• 5 Amps* 115V
• Open Diameter: 40'
• Lbs of Thrust: 28
• Cord Lengths (ft): 25, 50, 100, 150, 200
• Shipping Weights: 35, 37, 41, 49, 55


MODEL P750


SPECIFICATIONS:

3/4-hp
4.7 Amps* 115V
Open Diameter:
60'
• Lbs of Thrust: 32
Cord Lengths (ft): 25, 50, 100, 150, 200
Shipping Weights: 44, 46, 50, 58, 64



MODEL P1000

SPECIFICATIONS:

1-hp
7 Amps* 115V
Open Diameter:
80'
• Lbs of Thrust: 36
Cord Lengths (ft): 25, 50, 100, 150, 200
Shipping Weights: 44, 46, 50, 58, 64



*  All units available in 230V, (halve the amps, i.e., 2.5 @    115V = 1.25 @ 230V).


** 200 Ft. available in 230V only


*** Based on an average winter – extreme conditions will cause open diameter to become smaller.





Adjustable Thermostat


Brackets

Dock Mount
 
Electrolysis Kit

Lines

Propellers

Replacement Cords

1/4-hp Replacement Motor
1/4-hp, w/prop, zinc & cord
1/2-hp Replacement Motor
1/2-hp, w/prop, zinc & cord
3/4-hp Replacement Motor
3/4-hp, w/prop, zinc & cord
1-hp Replacement Motor
1-hp, w/prop, zinc & cord
Timer (230V)
 
Screen Accessory Kit
1" Mesh Screen on ICE EATER to help prevent damage due to debris. Can be installed top, bottom, or both (1 ea. per kit)
Shackles

Shrouds

Timer (115V)

Zinc

 

The Power House, Inc. on FACEBOOK

powered by Sunken Treasure Design