|
|
| |
 |
|
Model P250
|
|
Ice Eater P250 - 1/4 HP draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!
|
|
More...
|
|
Specifications:
|
- Horsepower: 1/4 HP
- Power needed: 115/230 volts, 2.5/1.25 amps, 1-phase, 50/60 Hz
- Typical Thrust: 20 lbs. thrust
- De-Ices Diameter of: Approx. 25 ft.
- Uses: De-icing individual boats & slips or light ice
|
|
|
Features:
|
Ice Eater P250, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.
Ice Eater P250 Features:
- 1/4 HP energy-efficient high quality motor with 20 lbs. thrust
- 115/230 volts, 2.5/1.25 amps, 1-phase, 50/60 Hz
- Standard 25 ft. quick change power cord. With optional 50 ft., 100 ft. and 150 ft. for 115/230V and 200 ft. for 230V only
- Two 25 ft. x 3/8 in. hollow braided lines with shackles
- Environmentally friendly lubricant
- Patented Venturi Design for maximum thrust
- Weight: 29 lbs. (25 ft. cord)
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.
*200 FT is only available in 230V
|
|
|
| |
 |
|
Model P500
|
|
Ice Eater P500 - 1/2 HP propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!
|
|
More...
|
|
Specifications:
|
- Horsepower: 1/2 HP
- Power needed: 115/230 volts, 5.0/2.5 amps,1-phase 50/60 Hz
- Typical Thrust: 28 lbs. thrust
- De-Ices Diameter of: Approx. 40 ft.
- Uses: De-icing individual boats and single slips
|
|
|
Features:
|
Ice Eater P500, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.
P500 Features:
- 1/2 HP energy-efficient high quality motor with 28 lbs. thrust
- 115/230 volts, 5.0/2.5 amps, 1-phase, 50/60 Hz
- Standard 25 ft. quick change power cord. With optional 50 ft.,100 ft. and 150 ft. for 115/230V and 200 ft. for 230V only
- Two 25 ft. x 3/8 in. hollow braided lines with shackles
- Environmentally friendly lubricant
- Patented Venturi Design for maximum thrust
- Weight: 35 lbs. (25 ft. cord)
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.
*200 FT is only available in 230V
|
|
|
| |
 |
|
Model P750
|
|
Ice Eater P750 - 3/4 HP propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!
|
|
More...
|
|
Specifications:
|
- Horsepower: 3/4 HP
- Power needed: 115/230 volts, 4.7/2.5 amps, 1-phase, 50/60 Hz
- Typical Thrust: 36 lbs. thrust
- De-Ices Diameter of: Approx. 60 ft.
- Uses: De-icing mid-sized boats and docks
|
|
|
Features:
|
Ice Eater P750, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.
Ice Eater P750 Features
- 3/4 HP energy-efficient high quality motor with 36 lbs. thrust
- 115/230 volts, 4.7/2.35 amps, 1-phase, 50/60 Hz
- Standard 25 foot quick change power cord. With optional 50 ft., 100 ft. and 150 ft. for 115/230V and 200 ft. for 230V only
- Two 25 ft. x 3/8 in. hollow braided lines with shackles
- Environmentally friendly lubricant
- Patented Venturi Design for maximum thrust
- Weight: 45 lbs. (25 ft. cord)
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.
*200 FT is only available in 230V
|
|
|
| |
 |
|
Model P1000
|
|
Ice Eater P1000 - 1 HP propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!
|
|
More...
|
|
Specifications:
|
- Horsepower: 1 HP
- Power needed: 115/230 volts, 7.0/3.5 amps, 1-phase, 50/60 Hz
- Typical Thrust: 42 lbs. thrust
- De-Ices Diameter of: Approx. 80 ft.
- Uses: De-icing large boats, marinas, or to replace several smaller units
|
|
|
Features:
|
Ice Eater P1000, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.
Ice Eater P1000 Features
- 1 HP energy- efficient high quality motor with 42 lbs. thrust
- 115/230 volts, 7.0/3.5 amps, 1-phase, 50/60 Hz
- Standard 25 ft. quick change power cord. With optional 50 ft., 100 ft. and 150 ft. for 115/230V and 200 ft. for 230V only
- Two 25 ft. x 3/8 in. hollow braided lines with shackles
- Environmentally friendly lubricant
- Patented Venturi Design for maximum thrust
- Weight: 44 lbs. (25 ft. cord)
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.
*200 FT is only available in 230V
|
|
|
|
